Granulating And Spray Drying

Spray Dryer

Evaporated water
Temp. control range
40°C~ 220°C
Sample flow Variable
up to 26mL/min
Spray nozzle
Display language
Japanese, English,
  • Easily micronize liquid samples with a spray dryer.

    ADL311-A : For aqueous soluble samples
    ADL311S-A: For aqueous soluble samples
    and orgnic solvent*

    *(When organic solvent is used, a GAS410 organic solvent recovery
    unit is required.)

    • Easy setup, easy operation

    • Suitable for heat sensitive samples. High heat is not
      directly applied to dry, fine powder

    • Obtain contaminant free fine powder which is not
      oxidized and contains minimal moisture

    • Direct drying of solution or solution liquid into fine
      powder. No pre- or post processes such as filtration,
      separation, or pulverization required

    • Safe and explosion free working is guaranteed in
      combination with GAS410 due to oxygen &
      pressure control (ADL311S-A only)

    • Organic solvents are recovered in a closed loop to
      protect the environment to enable minimized pollution

    • Easy operation with one-touch detachable mechanism for drying chamber and cyclone

    • An arm jack is equipped as standard for easy installation and removal of glassware attachments

    • A service outlet (max.2A) and a sample stand are equipped as standard for connecting a magnetic mixer for stirring suspended liquid samples

    • Unique peristaltic pump, nozzle cooling mechanism, pulse jet mechanism and a nozzle knocker for stable spray drying

    • ADL311SA is highly mobile on wheels, or usable with shorter height as a bench top unit by removing the movable caster

Solvent Recovery Unit

Circulation flow
0.12 to 0.65m3 /min
Recovery capacity
1,300mL/h or more

Inert N2 Gas Sealed System used in conjunction with Spray Dryers

The Inert N2 Gas Sealed System is used to prevent external discharge when combined with a spray dryer (ADL311SA or GB-210A) when using an organic solvent.


  • Dehumidifier (Freezer) integrated in GAS410. No extra Freezer/
    dehumidi-fier equipment needed

  • Compressor included, no need for a separate compressor to operate
    the spray dryer ADL311SA when using organic solvent samples

  • Flammable or toxic solvents can be processed by combining a N2 gas
    sealed circulation system and a solvent recovery system (with freezer
    and capacitor)

  • Explosion safety with closed loop N2 inert gas system

  • Recovery of solvent to protect the environment and enable minimized

  • Drying of easily oxidized materials is possible

  • Supports low temperature drying of materials that easily deform with

  • No freezing risk due to organic solvent with aqueous solution mixtures which could cause damage to the closed loop GAS410 system

  • Spray drying and recovery of products and solvents are performed with meticulously devised safety measures

Contact Us

Prime Lab Scientific Instruments LTD is a distributor of advanced scientific and laboratory instruments for the chemistry, biotechnology, life science, pharmaceuticals and electronics industries. We serve as the local partner and distributor for a variety of leading international manufacturers.
Contact Us
(+972) 077-205-2099
(+972) 153-77-205-2099
Email Us
Address: info(@)
Derech Hasharon 8 St, Kfar Saba, Israel
Office Hours:
Sunday - Thursday: 8:00 - 17:00
Friday - Saturday: Closed
© Primelab 2022. All rights reserved.