Forced convection oven
Operating temp. range: RT +30oC~260oC
Temp. distribution accuracy ±2.0°C (at 200°C)
Internal capcaity: 150L: DKG610/610V/650/650V
300L: DKG810/810V/850/850V
Improved heating and cooling time compared to conventional oven models.
- Temperature increase and decrease time improved by
up to 50% (at no load) compared to conventional company models resulting to extensive increase in work
efficiency. - Employment of a total exhaust system in which air supply
and discharge are linked by operation of the manual
damper at the front realizes extensive reduction in temperature decrease time. - Horizontal air flow system ideal for batch processing
and processing samples in a magazine rack achieves
high precision temperature performance even at loaded
condition - Silicon-free fluoro rubber door packing used for select
models. (DKG610V/650V/810V/850V)
Supports multiple power sources: 200-220V for models
610/610V/810/810V and 230-240V for 650/650V/850/850V.
For additional models press here
Inert oven
Operating temp. range: RT +30oC~260oC
Temp. distribution accuracy ±2.0°C (at 200°C)
Internal capcaity: 150L: DKG610/610V/650/650V
300L: DKG810/810V/850/850V
Suitable for Curing Process in a low oxigen atmosphere
- Temperature increase and decrease time improved by
up to 50% (at no load) compared to conventional company models resulting to extensive increase in work
efficiency. - Employment of a total exhaust system in which air supply
and discharge are linked by operation of the manual
damper at the front realizes extensive reduction in temperature decrease time. - Horizontal air flow system ideal for batch processing
and processing samples in a magazine rack achieves
high precision temperature performance even at loaded
condition. - Silicon-free fluoro rubber door packing used for select
models. (DKG610V/650V/810V/850V)
Supports multiple power sources: 200-220V for models
610/610V/810/810V and 230-240V for 650/650V/850/850V.
For additional models press here
Fine oven
Operating temp. range:
RT +10o
C~260oC
DF412S/612S
RT +10o
C~360oC
DH412S/612S
Temp. gradient
10°C (at 260°C)
DF412S/612S
12°C (at 360°C)
DH412S/612S
Internal capcaity:
91L
DF/DH412S
216L
DF/DH612S
Fine oven with explosion preventive vent door
- Equipped with safety door to relieve an explosion pressure (explosion
preventive vent door) and an interlock door knob to reliably secure main
unit and door. - The product is integrated with the following interlock functions:
①Through the door lock mechanism, device runs while door is locked.
②Through the explosion detector (set on top), operation stops when activated - Standard functions include program operation and other high precision
functions. - Improved safety functions include self diagnostic, automatic overheat
prevention and key lock.
For additional models press here
Natural convection oven
Operating temp. range:
Room temp.
+10oC
~210/250/260oC
Temp. distribution accuracy
±2.5°C
(at 210°C)
Internal capcaity:
27L DKN302/90L DKN402/150L DKN602/612/90L DKN402/535L DKN912
Standard “Best Seller” ovens – Fully programmable
Standard forced air convection ovens are programmable
and come with extended functions and safety features.
Operation and functions
- DKN302/402/602/612 come with observation windows
- Programmable PID controller for easy program settings 30-step,
3-pattern program controller with repeat functions - Fixed setting, programmed, Quick Auto stop, Auto stop, and Auto
start operating modes with easy control capabilities - Over-heating prevention, Key lock function and calibration off-set
are possible with auxiliary functions
Safety features
- Self diagnosis functions (Temperature sensor abnormal, Heater
disconnection, SSR-short) Automatic overheating prevention,
Electric leakage breaker with over current protection, Key lock
function
For additional models press here
High Temperature Gravity Convection Oven
Operating
temp. range
300~700oC
Temp. distribution
accuracy
±25o
C (at 700oC)
Internal
capcaity
13.75L
Programmable natural convection oven with high accuracy control at high
temperature range.
Operation and functions
- Can be used as constant temperature oven, drying oven, and electric
furnace for ashing, sintering, etc. as unit is suitable for each of these
three functions. - Easy programmable operation, fixed temperature, quick auto stop, auto
stop and auto start. - Lock function, auto recovery after power failure, calibration offset.
Safety Features
- Self-diagnosis circuit (Abnormal temp. sensing, Heater disconnection,
Auto overheat prevention, SSR short circuit), Overheat protector, ELB
to prevent overcurrent, Key lock function.
Clean oven
Clean oven suitable for temperature test in dust-free environment.
Adoption of anti-fouling caster (preventing wheel contamination during transportation)
Improvement of visibility of HEPA filter replacement timing by three color indication.
Improvement of safety by phase-reversal relay, detecting of incorrect wiring of power supply when installing.
Cable diameter changed from 30mm I.D to 33mm I.D when compare withconventional equipments.
More options when compare with conventional equipment.
For additional models press here
Glassware drying oven
Operating
temp. range
Room temp. +5o
C~70oC
Internal capcaity
92L DG400/445L DG850
Easy operation and highly acclaimed Glassware drying oven.
Features
- Large observation window for easy observation.
- Can be used to store instruments after drying.
- Adjustable foot for stability on uneven floors
- Mobile on casters (DG850)
- Equipped with stainless steel pipe heater and water
receiving plate at the bottom. - DG850 installed with filter at air in-take port, exhaust fan
and germicidal lamp for fast drying. - Dial setting and digital display of temperature control
and timer (DG850)
For additional models press here
Vacuum drying oven
Operating
temp. range
40°C to 240°C
Operating
pressure range
101~0.1kPa
Internal
capcaity
10L ADP200/27L ADP300
- The controller is equipped with auto start and
quick auto stop. - A silicone rubber packing is used for the door to
maintain a high level of airtightness. - The controller is equipped with safety functions
such as self-diagnosis and overheat prevention. - The temperature sensor and control circuit are
designed to be independent of each other, and
the automatic overheat prevention function
operates in conjunction with the set temperature.
For additional models press here
Open chamber
Operating
temp. range
-15°C to +60°C
OTC-213A
Air curtain type
2 layers
OTC-213A
3 layers
OTC-2D
Internal
capcaity
134L
OTC-213A
300L
OTC-2D
- Spacious work space, hands can be directly
placed inside the chamber. - Can be remotely controlled by a personal
computer with the RS232C interface. - Designed with econo-cover (OTC-213A is optional)
to improve temp. distribution accuracy and temp.
rising time.
For additional models press here